Skip to content Skip to main navigation Skip to footer

Alerts

All alerts are visible in the Alert list. There they can be edited or deleted. To create a new alert, press the New Alert button. There you can choose from these alert types.

Alert types

Speeding

An alert is triggered if the vehicle is recorded driving above the defined speed limit.


1. Choose the speeding alert and alert name.
2. Notification email. If empty, mail will arrive at the user who is logged in.
3. Recurrence and waiting period.
4. Choose units OR labels.
5. Alert activity time and day.
6. Speed limit in km/h. If the unit goes over the speed limit the alert will be activated.

POI

Alert is triggered if the vehicle enters and or exits a defined POI feature.

  1. Choose POI alert and alert name.
  2. Notification email. If empty, mail will arrive at the user who is logged in.
  3. Recurrence and waiting period.
  4. Choose units OR labels.
  5. Alert activity time and day.
  6. Choose the POI layer you wish the alert to be based on.
  7. Choose if you wish the alert to be activated on the POI entrance, exit, or both.

Service

1. Choose service alert and alert name.
2. Notification email. If empty, mail will arrive at the user who is logged in.
3. Recurrence and waiting period.
4. Choose units OR labels.
5. Alert activity time and day.
6. Enter the next service date or kilometers to cross until service. If you enter both, alert will be activated for what ever comes first.

Fuel Drop

Alert is triggered when the sensor picks up a significant drop of fuel amount in the tank (min 10% of the fuel tank volume).

1. Choose fuel drop alert and alert name.
2. Notification email. If empty, mail will arrive at the user who is logged in.
3. Recurrence and waiting period.
4. Choose units OR labels.
5. Alert activity time and day.

Generic Sensor

Alert is triggered when a sensor picks up custom set parameter values.

1. Choose the Generic sensor alert and alert name.
2. Notification email. If empty, mail will arrive at the user who is logged in.
3. Recurrence and waiting period.
4. Choose units OR labels.
5. Alert activity time and day.
6. Choose an alert sensor.
7. Choose parameter value.

Ungeared

Alert is triggered when the vehicle is turned on (there is a contact, the contact sensor value is 1 – not 0) but it isn’t moving (no speed data) for a defined amount of time.

1. Choose Ungeared alert and alert name.
2. Notification email. If empty, mail will arrive at the user who is logged in.
3. Recurrence and waiting period.
4. Choose units OR labels.
5. Alert activity time and day.
6. Enter the alert parameter.

Maintenance

Alert is triggered when a predefined maintenance setting is coming up. More on maintenance here.

1. Choose Maintenance alert and alert name.
2. Notification email. If empty, mail will arrive at the user who is logged in.
3. Recurrence and waiting period.
4. Choose units OR labels.
5. Alert activity time and day.
6. Enter the alert parameter.
7. Enter an alert value. If you enter both, the alert will be activated for whatever comes first.

Was This Article Helpful?